Pineapple Mark V Standard First Boot & Start

So to start with Pineapple Mark V Standard, we need latest updated firmware.
Pineapple Mark V Ships with latest firmware and files are present on SD Card.

1. Insert Micro SD Card (Containing Firmware Files) into Pineapples SD Card slot
2. Plug in power cable
3. Once device starts, green light will indicate power supply and solid blue light which indicates firmware flashing in progress.
4. Wait for around 5 minutes, after which all other light will blink contentiously which indicates Flashing process is done and device is ready to use.

While flashing firmware first time i faced some difficulties, all lights were in solid state for more than 10 minutes after which I reset power supply and it worked as mentioned by HAC5 team in manual.

Once flashing process is done, we need to configure device which can be done by connecting Your Laptop to Ethernet port on pineapple, and browse to http://172.16.42.1:1471 

In my case at first it didn't work so manually assigned Ip to LAN Adapter and then started working fine.

First Acces

Setting up password for pineapple

Password Set 

After Login to Pineapple (Web + SSH)

And your Pineapple is ready to start !!!!

Wait...there are much more things than this....:)

WiFi Pineapple Mark V Standard

Recently bought new Wifi Pineapple Mark V Standard device, and looks Gr8....
Lets have little walk through of device :)

Device Specifications:

CPU: 400 MHz MIPS Atheros AR9331 SoC.
Memory: 16 MB ROM, 64 MB DDR2 RAM
Disk: Micro SD support : up to 32 GB, FAT or EXT, 2 GB Included
Mode Select: 5 DIP Switches - 2 System, 3 User configurable
Wireless: Atheros AR9331 IEEE 802.11 b/g/n + Realtek RTL8187 IEEE 802.11 b/g
Ports: (2) SMA Antenna, 10/100 Ethernet, USB 2.0, Micro SD, TTL Serial, Expansion Bus
Power: DC in Variable 5-12v, ~1A, 5.5mm*2.1mm connector, International Power Supply
Status Indicators: Power LED, Ethernet LED, Wireless 1 LED, Wireless 2 LED

Product Link : https://hakshop.myshopify.com/products/wifi-pineapple

First Look Of Wifi Pineapple Mark V Standard 

Specifications

Specifications

Features

My HAK5 Kit...:)

Wifi Pineapple Mark V Standard Product includes:

1. Wifi Pineapple Mark V Standard
2. 6dBi SMA Antennas (Quantity 2 )
3. Micro SD Memory Card ( With Latest Firmware)
4. International Power Adapter
5. Ethernet Cable

I purchased Below Accessories :

9dBi Dipole Antenna with Magnetic Base https://hakshop.myshopify.com/collections/antennas/products/9dbi-dipole-antenna-1

SMA Male Jack to RP-SMA Female Adapter:
https://hakshop.myshopify.com/collections/antennas/products/sma-male-jack-to-rp-sma-female-adapter

So this was external Look & Feel of device with its specifications....:) shortly am going to post much more interesting information on Wifi Pineapple Mark V Standard Product.
Keep visiting...